Single-Sided Rotary Tabletting Machine

"SH " Series High-Speed Single-Sided Rotary Tabletting Machine Models: JC-SH-31D/JC-SH-39DB/JC-SH-39B/JC-SH-47BB

  • Accurate tabletting
  • Compression in two stages
  • Tabletting compartment separated from drive mechanism
  • Mechanical compresssion system
  • Easy maintenance & cleaning
  • Meets GMP.

HAVE PROVEN TO BE RELIABLE FOR:

Efficient large size production runs, withcapacity upto 169,000 tablet per hour.

MACHINE DRIVE COMPLETELY SEPARATED FROM PRODUCTION AREA

Direct rotation of the turret by the main shaftreduces the noise level. The gearbox, with a casehardened nickel steel ground worm and bronze wormwheel (dia 500mm), it provides maximum protection to the gears and the drive system.

Operator control panel is designed with controls and indicating devices to minimize operator attention.

SAFETY DEVICE

Upper punch monitoring device is available that would switch off the machine in the event of punch tightness.

MECHANICAL FEEDER

The two chambers feeding system is driven from top by a variable speed motor. The unit can be easily assembled or disassembled for cleaning.

PRE-COMPRESSION AND MAIN COMPRESSION

For successful high speed tablet production of difficult and direct compression material, the large diameter of pre-compression roll (196mm)increase punch dwell times and allows for difficult formulations to be processed at high speed without loss of tablet quality.

CLEANING AND TOOL CHANGEOVER

The detachable panels can be removed easily, to expose the entire lower punch cams, and simplify the removal of lower punches & dies.

UPPER & LOWER PUNCH SEALS

The scrapers seals for the upper punches protect tablets from oil dripping, while the dust seals on the lowers prevent the punches from binding and reduce wear on the cam. This features combined with an efficient dust extraction system allows prolonged run with minimum downtime for cleaning.

Specifications:

MODEL
JC-SH-310
JC-SH- 39DB
JC-SH- 39B
JC-SH-47BB
Type of tooling
IPT"D"
EU"D"
IPT"D"
EU"D"
IPT"B"
EU"B"
IPT"BB"
EU"BB"
Number of station
31
39
39
47
Maximum Table diameter
25.4mm
1"
19mm(caplet)
(3/4")
16mm
(5/8")
13mm
(33/64")
Production capactity
(tablets/hour) *
27,900-111,600
35,100-140,000
42,300-169,000
Revolution of turret / Min
(60 cyc)*
15-60 RPM
Depth of fill adjustable to
19mm (3/4")
17mm (43/64")
Maximum operating pressure
10,000kgs (22,000lb)
6,000kgs (13,200lb)
Maximum pre-pressure
10,000kgs (22,000lb)
6,000kgs (13,200lb)
Diameter of die
38.1mm (1.5")
30.16mm (1.1875")
24mm(0.945")
Height of die
23.81mm (0.9375")
22.22mm (0.945")
Nominal diameter of punch body
25.4 mm (1")
19 mm(3/4")
Overall Length of upper Punch
IPT 133.35 mm (5.25") or EU 133.6 mm
Overall Length of lower Punch
IPT 133.35 mm (5.25") or EU 133.6 mm
Turret P.C.D
490 mm
Power consumption
5HP (3.7kw)
Machine dimensions
900x1100x1750mm(H) (not including hopper)

Subjest to the characteristics of the power.
The manufacturer reserves the right to modifty the design, specifiaction, etc., to improve the performance of the machine without notice. All the specifiaction shown are reference only.