Double - Sided Rotary Tabletting Machines

DSH Series MODELS : JC-DSH-31D JC-DSH-39DB JC-DSH-39B JC-DSH-47BB Double - Sided Rotary Tablet Machines, can be proven to be reliable for:

  • For large batch production.
  • Allow for sngle layer tabletting with double-sided output.
  • Accurate tabletting
  • Tabletting compartment separated from drive mechanism.
  • Mechanical compresssion system.
  • Easy maintenance & cleaning.
  • Meets GMP.

Cam design & lubrication

A centeral lubrication system supplies oil contiuously to lower punches, & upper punches. The ejection cam is manufacterd from special tool steel for extended life, while a double sided lifting cam is provided.

Safety device

Upper punch monitoring device is available that would switch off the machine in the event of punch tightness.

Cleaning and tool changeover

The detachable panels can be removed easily, whicj reveal the entrte lower punch cams This allows easy removal of the lower punches.

Machine drive is completely separated from the presss space

Direct totation of the truuet by the main shaft reduces the noise level. The gearbox, with a casehardened nickel steel ground worm amd bronze wormwheel, it provides maximum protection to the gears and the drive system.

Mechanical feeder

The two chambers feeding system is driven from top by a variable speed motor. The unit can be easily assembled or disassembled for cleaning.

Pre-compression and main compression

For successful high speed table production of difficult and direct compression material, the large diameter of pre-compression roll increase punch dwell time and allows for difficult formulations to be processed at high speed without losss of tablet quality.

Mechanical compression system

The design of mechanical compression system can be ensured for longer production runs. Pressure rollers are made of special tool steel that ensures uniform pressure application, the double bearings are fitted, which minimize wearing of the rollers.

Upper & Lower punch seals

The scrapers seals for the upper punches protect tablets from oil drip, while the dust seals on the lowers prevent thepunches from binding and reduce wear on the cam. This combined with an efficient dust extraction system allows prolonged run with little downtime for cleaning.

Specifications:

MODEL
JC-DH-230
JC-DH-
29DB
JC-DH-
29B
JC-DH-35BB
Type of tooling
IPT"D"
EU"D"
IPT"D"
EU"D"
IPT"D"
EU"B"
IPT"BB"
EU"BB"
Number of station
31
39
39
47
Maximum Table diameter
25.4mm
1"
19mm(caplet)
(3/4")
16mm
(5/8")
13mm
(33/64")
Production capactity
(ablets/hours) *
52000-200000
65000-260000
78000-312000
Revolution of turret / Min
(60 cyc)*
14-56 RPM
Depth of fill adjustable to
19mm (3/4")
17mm (43/64")
Maximum operating pressure
10,000kgs (22,000lb)
6,000kgs (13,200lb)
Maximum pre-pressure
3,000kgs (6,600lb)
3,000kgs (6,600lb)
Diameter of die
38.1mm (1.5")
30.16mm (1.1875")
24mm(0.945")
Height of die
23.81mm (0.9375")
22.22mm (0.945")
Nominal diameter of punch body
25.4 mm (1")
19 mm(3/4")
Overall Length of upper Punch
IPT 133.35 mm (5.25") or EU 133.6 mm
Overall Length of lower Punch
IPT 133.35 mm (5.25") or EU 133.6 mm
Turret P.C.D
490 mm
Power consumption
5HP (3.7kw)
Machine dimensions
900x1100x1750mm(H) (not including hopper)
Net weight
2600 kgs (5720 Ibs)

Subjest to the characteristics of the power.