English 繁體中文 簡体中文日語

Product List

4 in 1 Blister Packaging Machine

  1. Home
  2. Main Products
  3. Blister Packaging Machine

Blister Packaging Machine Buy Guide

The blister packing machine is a pharma packaging machine that can be used in tablets, capsules, etc pharmaceutical manufacturing. We provide thermoforming blister packing machine and an Alu blister packing machine, if you are interested in purchasing blister packaging machines, welcome to contact us through the following ways, we will provide you with the most detailed blister packaging machines information!

Thermoforming Blister Packing Machine DK-PS 20A/30A/40A

Thermoforming Blister Packing Machinery

Alu-Alu Blister Packing Machine DK-PS 200 / 400

Alu-Alu Blister Packing Machine
  • The manufacturer reserves the blister packaging machine right to modify the design, specification, etc., to improve the performance of the machine without notice.
  • All the specofication shown are just for reference.

Blister Packaging Machine Procedure

  • Forming film of reel support with automatic unwinding system.
  • Plate heating system. Lift-off on machine stop.
  • Compressed air forming station.
  • Filling device (Automatic or manual).
  • Coverfoil of reel support with automatic unwinding system.
  • Guide rails.
  • Sealing station.
  • Cooling station.
  • Punching station.
  • Waste winding unit.

Advantages of The Platen Sealing System:

  • Sufficient process time.
  • Constant and relatively low sealing temperature over the full sealing plaren.
  • Low energy cost.
  • Flexibility to seal a range of lid materials.
  • Proportional heat control with only +/- 5°C variation.
  • Uniform pressure distribution over the full platen surface.
  • Heat transfer to product is avoided.
  • Absorption of sealing load within the station.
  • Separation of indexing and sealing functions.

Optional Accessories:

  • Slitter station or perforation station.
  • Auto feeding device for capsule with orientation.
  • Vibrator auto feeding device for Tablet/Caplet.
  • Discharge conveyor device.
  • Safety guard.
  • Missing check
  • Printed mark controller.

Blister Packaging Machine Applications

  • Pharmaceutical:Tablets, Capsule, Ampoules, Vials etc.

Flow Chart:

Mould:

* Upper & Lower forming tool.
* Slitter tool.
* Perforation tool.

Feed Systems

* Auto-feeding device for capsule with orientation.
* Vibrator for Tab / caplet Auto feeding device.
* Missing check device.
* * Hopper for pill / sugar coating tab products.
* Hopper for manual feeding products.
* Bursh

Blister Packaging Machine Specification
DK-PS 200
DK-PS 400
DK-PS 20A
DK-PS 30A
DK-PS 40A
Formed area available
(max mm)
80(W)x110(L)
80(W)x190(L)
80(W)x120(L)
80(W)x150(L)
100(W)x190(L)
Form film thickness
(mm)
150-300 micron
150-300 micron
250-350
micron
250-350
micron
250-350
micron
Lid foil width
(max mm)
124
195
124
154
195
Forming depth
(mm)
13
13
13
(or as require)
13
(or as require)
13
(or as require)
Reel diameter
Film (max mm)
foil (max mm)
core (mm)
 
400
240
70-76
 
400
240
70-76
 
400
240
70-76
 
400
240
70-76
 
400
240
70-76
Conveying length
(max mm)
100
108
112
112
112
Capacity / Strokes
(max)
50
50
50
50
50
Electrical Connection 220V,380V,
440V50 Hz
or 60 Hz		 220V,380V,
440V50 Hz
or 60 Hz		 220V,380V,
440V50 Hz
or 60 Hz		 220V,380V,
440V50 Hz
or 60 Hz		 220V,380V,
440V50 Hz
or 60 Hz
Compressed
air Consumption		 10.7 CFM
at 7Kg/Cm2
G303 L/Min		 16.4 CFM
at 7Kg/Cm2
G464 L/Min		 36.9-52.4 CFM
at 7Kg/Cm2
G1045-1484 L/Min		 36.9-52.4 CFM
at 7Kg/Cm2
G1045-1484 L/Min		 52.4-82.4 CFM
at 7Kg/Cm2
G1484-2334 L/Min
Cooling water
Consumption		 0.06m3-0.1m3
/ Hr15oC-20oC		 0.18m3-0.3m3
/ Hr15oC-20oC		 0.06m3-0.1m3
/ Hr15oC-20oC		 0.06m3-0.1m3
/ Hr15oC-20oC		 0.18m3-0.3m3
/ Hr15oC-20oC
Floor space
(approx mm)		 2350Lx960W
x1550H		 2350Lx960W
x1550H		 3260Lx800W
x1550H		 3260Lx800W
x1550H		 3260Lx800W
x1550H
MAIN MOTOR,
HEATER
1HP, 3-4W
2HP, 5.1-7W
1/4HP, 3-4W
1/4HP, 4-6W
1/4HP, 5-7W
Shipping
Data:		 G.W. Kg
N.W. Kg
(approx) Cu-Ft
1400
1000
190
1700
1300
230
1000
700
190
1100
800
200
1200
900
200
  • Please direct your correspondence to：
  • Duan Kwei Machinery Enterprise Co., Ltd.
  • 76, Alley 105, Lane 514, Chung Cheng Road, Hsin Chuang, New TaipeiI City, Taiwan
  • TEL : 886-2-29016726
  • FAX : 886-2-29026247
  • e-mail: duankwei@ms23.hinet.net